ANALISIS PENGARUH KOMBINASI ARUS LISTRIK TERHADAP LIQUID PENETRANT TESTING, KEKUATAN TARIK, DAN KETANGGUHAN IMPAK PADA PLAT BAJA KARBON RENDAH ASTM A36 DENGAN LAS SHIELDED METAL ARC WELDING

VEGA, BINTANG PUTRA PRATAMA (2026) ANALISIS PENGARUH KOMBINASI ARUS LISTRIK TERHADAP LIQUID PENETRANT TESTING, KEKUATAN TARIK, DAN KETANGGUHAN IMPAK PADA PLAT BAJA KARBON RENDAH ASTM A36 DENGAN LAS SHIELDED METAL ARC WELDING. SKRIPSI.

[img] Text
FULL SKRIPSI.pdf
Restricted to Repository staff only

Download (2MB)

Abstract

This study aims to determine the effect of Shielded Metal Arc Welding (SMAW) current variations on the tensile strength, impact toughness, and NonDestructive Testing (NDT) results of ASTM A36 low carbon steel. The welding current variations used in this study were 70 A, 90 A, and 110 A. The tests conducted included tensile testing based on the ASTM E8 standard, Charpy impact testing based on the ASTM E23 standard, and surface defect inspection using the Liquid Penetrant Test (LPT) method. The results of the study showed that the LPT inspection produced weld quality scores of 2 at 70 A, 6 at 90 A, and 4 at 110 A, indicating that the 90 A current produced the best surface quality with the fewest defects. The tensile test results showed that the average tensile strength increased with increasing welding current, reaching 263.023 MPa at 70 A, 297.973 MPa at 90 A, and 325.804 MPa at 110 A. Therefore, the highest tensile strength was obtained at 110 A. Meanwhile, the impact test results showed average absorbed impact energies of 165.88 J, 147.02 J, and 149.36 J, with average impact values of 1.63 J/mm², 1.43 J/mm², and 1.46 J/mm² for the 70 A, 90 A, and 110 A welding currents, respectively. The highest impact toughness was achieved at 70 A. Based on these results, it can be concluded that variations in SMAW welding current significantly affect the quality of ASTM A36 low carbon steel welded joints. The 90 A current produced the best surface quality based on the Liquid Penetrant Test (LPT), the 110 A current resulted in the highest tensile strength, while the 70 A current provided the highest impact toughness. Therefore, the selection of welding current should be adjusted according to the mechanical properties required for the intended welded joint application. Keywords: SMAW, ASTM A36, welding current variation, Liquid Penetrant Test, tensile test, impact test.

Item Type: Article
Additional Information: 220306013
Subjects: Teknik Mesin
Divisions: Program Studi > S1-Teknik Mesin
Depositing User: AMNI Perpustakaan Semarang
Date Deposited: 18 Nov 2026 02:33
Last Modified: 18 Nov 2026 02:33
URI: http://repository.unimar-amni.ac.id/id/eprint/7025

Actions (login required)

View Item View Item